Ribbon Flow systems

Home / Ribbon Flow systems

Current position − HomeProductsRibbon Flow systems − Ribbon Flow systems

Ribbon Flow systems

Product parameters

Product Category:Ribbon Flow systems

To view more product information or to request a high quality print copy, please contact us. Consult now
Product Detail

Ⅰ. Product Classification:

The unique properties of cast polyurethane Elastomers make them attractive to the roller industry to meet stringent requirements. 

Polyurethane rotary casting(also called no mould casting), is a kind of new polyurethane elastomer casting machine, which suitable for the process and shaping of all types of polyurethane rubber roller.

Ⅱ. Functions

1. Achieve the highest technical objects on basis on TDI, MDI elastomer.

2. Rubber roller of a variety of specifications and sizes can be produced without moulds, which saves investment.

3. Demoulding is not required, which reduces labor intensity, avoids the possibility of contamination of the roll core and improves the production efficiency.

4. Can be solidified at room temperature, and the solidification cycle is short. It can reduce energy consumption, improve the production efficiency.

5. Multilayer, complex rubber rollers of different rubber performance can be produced

6. Flexible production, strong motility and little requirement towards production sites.

7. In order to make products permanently reliable use and easy to maintain, we designed whole set of equipment including turntable and machine automatic production line, and special project, technology.

8. Mixing various colors auxiliary materials catalyst, can optimize production phase of different raw material output, hardness, color and product quality, meanwhile keep metering accuracy, prevent from waste.

9.No mold required - time and energy savings

10.No risk of contamination of the core by release agent

11.Flexibility - coverage of rollers of various sizes
and shapes
12.Coverage with several layers of different kinds

13.Energy savings


Ⅲ. Features:

1. The mixing head uses the mechanical new seal; through the three-axis computer, the casting sets automatic rotation, movement and lift.

2. Different casting amounts and formulations can be stored for the convenience of use in next time.

3. The color and hardness of polymer can be changed from one component to multiple components, to simultaneously maintain the accuracy and quality of the cast product. Color can be added to multiple components according to customer requirements.

4. Independently control the temperature of all piping system and mixing system; the German high-precision flow meter monitors the casting amount and independently controls circulation pressure inside the tubes of each component.

5. The raw material tank adopts the hot air circulation of electric heating(patented technology), which makes heating faster, efficient, energy saving(50%), safe and environmental.

6. The device has function of automatic detection of pressure, temperature, flow, open and closed loop etc; it will automatically determine when there is abnormity, diagnose, give alarm and display abnormal factors in words.


Ⅳ. Application:

Apply to all kinds of rubber roller, high load solid core wheel, mine sieve plate, hydraulic sealing ring, photovoltaic guide pulley and other high wear- resistant material.


Ⅴ. Main parameter:



Total output (g/min)


Mixing ratio: A:B:C


Pouring head stirring speed(mm/min)


Rotary speed of rubber roller(r/min)


Single layer pouring thickness of rubber roller(mm/time)


Diameter range of pouring rubber roller(mm)


Length range of pouring rubber roller(mm)


Linear velocity of rubber roller surface rotation(mm/s)


Total power(kw)



1. Pretreatment of raw material: RC-A raw material need 65-75℃ drying room and heating 48 hours, when prepolymer fully fusion, then pour into casting machine container. RC-8 will be crystal in winter, so please heating in drying room.

2. Rubber roller core pre-treatment: same as mould casting technology, gasoline, acetone degrease  after surface sandblast. Must gelatinize, then start to cast after gumming is dry.

3. Curing condition: no need vulcanize, place 36hour in room temperature, then lathe work. After one week, it can be used.



This product Keywords:
Online inquiry

Welcome to our website! Please feel free to send us your questions by asking us, we will contact you and provide you with the services as soon as possible. Please write in English.

© Wenzhou Zecheng Electromechanical Equipment Co., Ltd.